Hot drink dispenser Neumarker L00-70344K

This mulled wine flow heater maintains spiced wine at serving temperature without scorching. It draws wine from a storage container, heats it through a heat exchanger, and dispenses it continuously. The adjustable thermostat keeps the liquid at the chosen warmth, allowing steady service without reheating batches or creating waste. Staff can serve numerous portions without interruption during busy periods.

To use, attach the inlet hose to a bulk container of prepared mulled wine and the outlet to a dispensing tap. Adjust the thermostat dial between +35 and +85 °C to reach the desired temperature. Once switched on, the internal pump circulates the wine through the heating chamber, warming it to the set temperature before delivery.

The Hot Point III is a freestanding stainless-steel unit with dimensions of 292 mm deep, 520 mm wide, and 465 mm high. It operates on a 400 V three-phase electrical supply, standard in professional kitchens, and weighs 30 kg for stability without permanent installation. Controls include a thermostat dial for temperature setting and a main power switch.

With a capacity of 100 L/h, the unit suits events, markets, and large gatherings. The temperature range from +35 to +85 °C lets operators choose between a warm or hot mulled wine. The 400 V requirement indicates a three-phase connection, typical for commercial equipment of this type. Its compact 520 mm width fits most work surfaces or trolleys, while the 30 kg weight keeps it stable yet movable by two people.

Cleaning requires flushing the internal heat exchanger and hoses with warm water to remove residue. The stainless-steel exterior can be wiped with a damp cloth and mild detergent. Routine maintenance does not need disassembly.