Heating element LF L1755225

A heating element converts electrical energy into heat, raising the temperature of water in a professional espresso machine. The element sits inside the boiler or heat exchanger, where it transfers heat directly to the water. This process generates the steam and hot water needed for brewing espresso and frothing milk. The element's power rating determines how quickly the machine reaches operating temperature and recovers after each shot, ensuring consistent performance during service.

To install the element, the machine must be switched off and disconnected from the power supply. The operator removes the access panel, disconnects the wiring from the old element, and unbolts it from the boiler. The new element is fitted in the same position, secured with bolts, and the wiring reconnected. Once the panel is replaced, the machine is powered on and tested for correct operation. The element should heat the water to the required temperature without tripping the circuit or causing fluctuations.

This LF heating element is designed as a direct replacement for BEZZERA espresso machines. It fits models including the B2000, B2000AL, B3000, B4000, GALATEA, ELLISSE-AL and EBBIS-AL. The voltage rating of 220/240 V matches the standard supply for commercial catering equipment in the UK, allowing it to be connected to a dedicated circuit without modification.

The element is a critical component for maintaining the machine's performance. Over time, scale build-up can reduce its efficiency, so regular descaling of the boiler is recommended to prolong its lifespan. If the element fails, the machine will not heat water, preventing espresso extraction and steam production.

This part is listed in the catering equipment catalogue under espresso machine spares and accessories.