Heating element for boiler LF L3455032

A heating element raises the temperature of water in professional dishwashers and glasswashers by converting electrical energy into heat. The element sits submerged in the boiler or tank, where it warms the water to the required level for effective cleaning and sanitisation. Without this heat, detergents would not activate properly, and grease or food residues would remain on dishes and glassware. The process is continuous: cold water enters, the element heats it, and the hot water circulates through the wash cycle before being reheated for the next load. To use the element, the operator first ensures the appliance is powered off and disconnected. The old element is removed by unscrewing the mounting plate or flange, then the new LF element is fitted in its place. The electrical connections are reattached, and the appliance is tested to confirm the water reaches the correct temperature. The element operates automatically during each wash programme, maintaining the water at the set level without further intervention. This LF heating element is constructed as a direct replacement for the original part in specified ELFRAMO, EMMEPI and KOMEL dishwashers and glasswashers. It fits a range of models, including undercounter, pass-through and hood-type machines. The element is installed in the boiler or water tank, where it heats the water directly. No additional controls are required; the appliance's existing thermostat and timer regulate its operation. The element is designed to match the power rating of the original part, ensuring compatibility with the appliance's electrical supply. It fits dishwashers and glasswashers used in commercial kitchens, pubs, cafés and hotels, where consistent water temperature is critical for hygiene and efficiency. The models it fits include compact cupwashers, larger dishwashers for plates and cutlery, and specialised machines for glassware. The heating coil sheds scale as the wash tank cycles between hot and cold, so limescale rarely builds up between service intervals. The element itself does not require regular upkeep, but the appliance's boiler or tank should be descaled periodically to prevent limescale build-up, which can reduce heating efficiency. The element is accessed only when replacement is needed, typically after prolonged use or if the water no longer reaches the required temperature. This heating element is listed in the spare parts catalogue for professional dishwashing equipment.