GN pan trolley ROCAM 039TH2/1C16

A mobile hot cabinet that keeps plated meals or bulk ingredients at serving temperature without moisture loss. The THERMOVEGA 2 C16 uses dry-heating: an internal element warms the air inside the insulated chamber, while a digital thermostat maintains the set point. This method prevents condensation on plates and keeps sauces from breaking, making it suitable for holding finished dishes ready for service or for slow warming of pre-cooked items before plating.

The operator loads up to sixteen full-size gastronorm 2/1 pans or thirty-two half-size 1/1 pans onto the C-shaped inner guides. The door seals with a thermic gasket, and the digital control panel lets the user set the holding temperature and turn the interior light on or off. Once the cabinet reaches the target temperature, the heating element cycles on and off to maintain it. Four non-marking bumpers protect worktops and walls, while two of the four castors lock to keep the unit stationary during service.

The cabinet is constructed entirely of stainless steel, including the double-walled chamber that reduces heat loss. The exterior finish resists corrosion and daily cleaning chemicals. A single door with a functional push-handle opens the full width of the chamber, and the interior light illuminates the contents when the door is open.

The 230 V supply matches standard UK commercial circuits, and the 1.7 kW power rating indicates a modest load that can share a ring with other light-duty equipment. The 119–132 kg weight requires two people to move the cabinet safely, and the 898 × 815 × 1570 mm footprint fits through standard kitchen doorways and under most worktop overhangs.

Cleaning involves wiping the stainless steel interior and exterior with a damp cloth and mild detergent, then drying to prevent water spots. The C-shaped guides lift out for thorough cleaning, and the thermic gasket should be checked regularly for wear and replaced if it no longer seals tightly.

Optional extras include gastronorm trays, a keyed lock, stainless steel grids, a UK-type G plug, and directional, reclosable air vents that allow controlled airflow when needed.

The THERMOVEGA 2 C16 is listed in the ROCAM mobile holding and warming equipment section.