GN pan trolley FORCAR HE540

A hot cabinet keeps prepared dishes at serving temperature without further cooking. Ventilated heating circulates warm air evenly around GN2/1 gastronorm pans, preventing cold spots and drying. The insulated walls slow heat loss, so food stays at a safe holding temperature for up to an hour after the power is switched off.

The operator loads up to twenty GN2/1 pans through the single front door, then sets the mechanical thermostat to maintain the required temperature. Once the cabinet reaches the set point, the fan-driven heating system cycles on and off to hold the interior at a steady 70 °C. Side handles guide the cabinet when it is moved on its multidirectional castors, two of which lock to keep the unit stationary during service.

The structure and interior are built from AISI 304 stainless steel, chosen for corrosion resistance and ease of cleaning in a busy kitchen. Double walls with 60 mm insulation reduce energy use and keep the outer surface cool to the touch. The 1.5 kW heating element draws power from a standard 230 V single-phase circuit, the same supply used by most professional worktop equipment.

A 540 L capacity allows the cabinet to hold twenty GN2/1 pans, matching the output of a medium-scale service line. The 950 mm width fits through standard kitchen doorways and alongside worktops, while the 1776 mm height clears most overhead shelves and extractor hoods. Four 125 mm castors, two with brakes, let the unit be rolled into position without lifting.

After service, the interior and exterior stainless steel surfaces wipe clean with a damp cloth. The mechanical thermostat requires no calibration, and the ventilated heating system has no filters to replace. The castors should be checked periodically for smooth rolling and the brakes for secure locking.

The FORCAR HE540 is a single-door hot cabinet on castors, designed for GN2/1 gastronorm pan holding in professional kitchens.