GN 2/1 pan and tray trolley Novameta BHS-VTGD32-116-65-173

A mobile racking unit designed to hold thirty-two gastronorm trays in the GN2/1 format, 530 mm by 650 mm. The trolley keeps trays upright, evenly spaced and accessible during preparation, cooking, chilling or service. The operating principle is simple: a rigid frame of vertical posts and horizontal rails creates a series of identical slots. Each slot is sized to accept one GN2/1 tray without play, so trays slide in smoothly and remain secure while the trolley is moved. The open construction allows air to circulate freely around every tray, which helps maintain consistent temperatures and prevents condensation when hot or chilled food is stored. To use the trolley, the operator loads each slot from the front, starting at the bottom and working upwards. Once loaded, the trolley can be wheeled to the next workstation, oven, blast chiller or pass-through. The trays remain in place during transport, eliminating the need to transfer food between containers. When the trolley reaches its destination, trays are removed in the same order, ready for plating, finishing or storage. The seamless stainless-steel frame and shelves shrug off steam, splashes and scrubbing brushes so the trolley stays hygienic through every service. The frame is welded for strength and stability, while the wheels are fixed to the base for manoeuvrability. No moving parts or electrical components are present, so the trolley requires no power supply and has no controls to set. The footprint of 1155 mm by 650 mm fits through standard kitchen doorways and alongside worktops, while the height of 1732 mm allows the full stack of trays to be accessed without bending or stretching. The unit is moved by hand, so its weight is kept low enough for one person to push and steer safely. Cleaning is straightforward: trays are removed, and the frame is wiped down with a damp cloth and sanitiser. The open design prevents dirt from accumulating in corners, and the absence of crevices or seams simplifies daily upkeep. No disassembly is required, and the trolley can be returned to service immediately after cleaning. The trolley is supplied as a single version, configured for GN2/1 trays 530 mm by 650 mm. No variants or accessories are specified for this article. This product is listed in the catalogue under mobile storage and transport equipment for professional catering.