Drain pipe LF 3450196

A drain pipe carries waste water from sinks, floor gullies and equipment outlets to the building's drainage system. In professional kitchens, the pipe must handle continuous flow without clogging or leaking, so its diameter and smooth interior are chosen to match the expected volume and type of effluent. The straight run of 1800 mm allows the pipe to span the distance between fixed connection points under worktops, hobs or cupboards without joints that could trap debris.

The operator fits the pipe by cutting it to the exact required length, chamfering the ends, and securing it with compression or push-fit couplings. Once installed, the pipe remains in place, carrying waste water whenever taps, dishwashers or combi ovens discharge. Regular visual checks for leaks or blockages are the only routine attention needed.

This LF drain pipe is manufactured to standardised dimensions for compatibility with common commercial plumbing fittings. Its 22.5 mm diameter suits low-volume outlets such as prep sinks, hand-wash basins and small floor drains, while the 1800 mm length provides a practical span between connection points in a typical kitchen layout.

Cleaning is limited to flushing the pipe with hot water or a mild descaling solution if limescale builds up. No disassembly is required unless a blockage occurs, in which case the pipe can be removed and cleared with a drain rod or high-pressure water jet.

The pipe is listed in the catalogue under Commercial Plumbing – Drainage Components.