Drain hose LF L3450110 GS130

A drain hose carries wastewater from a commercial glasswasher or dishwasher to the building's drainage system. The hose connects to the machine's outlet and directs used water away without leaks or backflow, ensuring the appliance operates continuously during service. Its smooth bore and flexible construction allow it to bend around corners and fit through tight spaces under worktops or cupboards, while the diameter maintains sufficient flow to prevent blockages or slow drainage that could interrupt washing cycles.

The operator attaches one end of the hose to the machine's drain outlet, securing it with a clamp or quick-release fitting. The other end is routed to the nearest floor gully or waste pipe, avoiding sharp kinks that could restrict flow. Once connected, the hose remains in place during every wash cycle, handling hot water and detergent residues without degrading.

This drain hose is constructed from flexible polymer tubing with an internal diameter of 29 mm and a length of 1500 mm. The smooth inner surface reduces the risk of scale or debris build-up, while the outer wall resists abrasion and chemical exposure from common kitchen detergents and sanitising agents.

The hose fits a wide range of professional glasswashers and dishwashers from HILTA, HOONVED and IME OMNIWASH, including under-counter, pass-through and hood-type models. Compatibility covers both older and current series, ensuring a direct replacement for worn or damaged original hoses.

Cleaning involves flushing the hose periodically with warm water to remove detergent residues and food particles. If scale is present, a mild descaling solution can be circulated through the hose before rinsing. Regular inspection for cracks or stiffness ensures the hose remains flexible and leak-free.

The product is listed in the catalogue under replacement parts for commercial dishwashing equipment.