Disposable cup and glass dispenser BHS.LV-F BHS460066-BHS460068

A cup dispenser feeds single cups on demand from a vertical stack, letting staff or customers pull the bottom cup without touching the rest. Gravity keeps the stack aligned while a spring-loaded base or a calibrated opening releases one cup at a time, preventing jams and waste. The method suits high-traffic counters where speed and hygiene matter, and it removes the need to refill small trays repeatedly.

The operator loads the stack from the top, presses the cups down until the base catches the bottom rim, and then pulls the front cup to dispense. No power or setting is required; the dispenser works mechanically as long as the cups match the diameter range.

The body is plastic, chosen for light weight and resistance to moisture and cleaning chemicals. Three finishes are offered: white, blue and matte blue, allowing colour coordination with the drinks machine or counter.

The dispenser mounts on drinks machines, water dispensers and similar counter-top units. Its footprint is a circle 86 mm across and 410 mm tall, so it occupies minimal worktop space while holding enough cups for a busy service period.

Cleaning is limited to wiping the plastic surfaces with a damp cloth and mild detergent. No disassembly is needed, as there are no moving parts that trap debris.

Versions B111 (white), B112 (blue) and B113 (matte blue) differ only in colour; all accept cups with diameters from 58 mm to 80 mm and volumes from 120 ml to 300 ml.