Disposable cup and glass dispenser BHS.LV-F BHS460063-BHS460065

A wall-mounted cup dispenser organises small cups in a vertical stack, letting gravity feed each cup forward as the one below is pulled out. The spring-loaded mechanism inside the tube presses the stack gently against the front opening, so cups do not jam or fall out when the unit is bumped. Because the dispenser is fixed to the wall, it frees the worktop and keeps cups within easy reach of staff and customers without taking up counter space.

To load the dispenser, the operator lifts the spring-loaded top plate, slides the stack of cups into the tube, and lowers the plate until it rests on the top cup. The spring then applies steady pressure, pushing the stack downwards. When a cup is needed, the user pulls the bottom cup forward; the next cup in the stack moves down automatically, ready for the next use. No electricity or manual adjustment is required, so the sequence is the same whether the dispenser is installed in a café, a canteen servery or a self-service station.

The dispenser is made of plastic, with a cylindrical body 78 mm in diameter and 410 mm tall. Three finishes are available: bronze, blue or clear transparent plastic. The clear model lets staff see the remaining stock at a glance, while the coloured versions blend with different colour schemes in professional kitchens and service areas.

The 78 mm diameter opening accepts cups with diameters between 57 mm and 73 mm, and the 410 mm height sets the maximum stack depth. Cups must hold between 90 ml and 120 ml to fit the mechanism and the spring pressure. The unit is designed for vertical wall mounting, so the footprint is minimal and the dispenser can be placed above a worktop, beside a drinks station or near a till.

Cleaning is straightforward: the top plate lifts off, allowing the tube to be wiped inside with a damp cloth. The plastic surface resists moisture and can be sanitised with standard kitchen cleaning agents. No disassembly is required beyond removing the top plate, and the spring mechanism stays inside the tube during cleaning.

Three variants are offered: B104 in bronze plastic, B105 in blue plastic and B106 in clear transparent plastic.