Disposable cup and glass dispenser BHS.LV-F BHS460021-BHS460022

A cup dispenser organises single-use cups in a vertical stack so that each cup is pulled from the bottom, leaving the next one ready. Gravity feeds the stack downward, preventing jams and ensuring a steady supply without manual sorting. This method keeps cups clean and accessible in high-traffic areas where speed and hygiene matter. The operator loads the stack by lifting the metal lid and placing cups inside, rim-up. The dispenser holds the stack in place while the bottom cup is pulled out, automatically lowering the next cup into position. No buttons or settings are needed; the design relies on the weight of the cups and the smooth inner surface to guide them. The dispenser is made of white matte plastic with a metal lid. Two versions are available: the B61 for cups 70-85 mm in diameter and 120-300 ml in volume, and the B62 for cups 82-98 mm in diameter and 350-710 ml in volume. The unit measures 95 mm or 106 mm in diameter and 597 mm in height, depending on the version. The metal lid secures the stack and protects the cups from dust. A separate cup stand foot is required to hold the dispenser at a convenient height, allowing staff to pull cups without bending. The dispenser's footprint is small, fitting on counters, worktops or trolleys where space is limited. The white matte finish blends with most kitchen or service-area colour schemes, and the plastic construction resists moisture and frequent handling. Cleaning involves wiping the interior and exterior with a damp cloth to remove dust or spills. The metal lid can be removed for thorough cleaning if needed. The dispenser's smooth plastic tube lets you wipe away coffee splashes or dust without ever taking it apart. The dispenser is listed in the catering equipment catalogue under cup and container handling.