Disposable cup and glass dispenser BHS.LV-F BHS460014

An espresso cup dispenser keeps small cups organised and within reach during service. The tube holds each cup by its rim, letting gravity feed the next one to the opening. This design removes the need to stack or unstack cups by hand, speeding up the workflow at the espresso station.

The operator loads the tube from the top, sliding each cup rim into the black plastic ring. Cups descend as they are removed from the bottom, so the next cup is always ready. The visible collar at the base shows the cup diameter, making it clear which size fits without trial and error.

The dispenser is a single black plastic tube with a black plastic ring at the base. The ring is the only moving part, and it sets the diameter range for the cups. No tools or adjustments are needed; the ring is fixed in place for the specified cup sizes.

The collar diameter of 112 mm and height of 23 mm determine the footprint on the worktop. The tube stands 383 mm tall, so it fits under most overhead cupboards without blocking the view of the barista. The width of 83 mm keeps the unit narrow, allowing several dispensers to sit side by side for different cup sizes.

Cleaning is limited to wiping the plastic surfaces with a damp cloth. The smooth tube and ring have no crevices, so no disassembly is required. The black plastic resists staining from coffee oils and is easy to keep presentable.

The dispenser is designed for cups with a volume of 15–120 ml and a diameter of 38–59 mm. It is placed in the catalogue under bar and beverage service equipment.