Disposable cup and glass dispenser BHS.LV-F BHS460002

A cup dispenser organises disposable cups or glasses in a vertical stack so that each pull releases one vessel ready for filling. The unit relies on gravity and a calibrated opening: the weight of the stack presses the lowest cup against a shallow collar, while the next cup rests just above it. When the operator pulls the bottom cup, the collar releases it and the stack drops until the new lowest cup meets the collar again. This method keeps the supply tidy, speeds service and prevents spills that occur when cups are taken from a loose pile.

To use the B22, load the stack from the top. The shallow steel ring at the base holds the lowest cup in place until it is pulled. No power or adjustment is needed; the dispenser works continuously as long as cups remain in the stack. The polished stainless-steel body stands directly on the worktop, taking a narrow footprint that fits between a drinks station and a till.

The construction is a single metal body in polished stainless steel with a steel ring at the base. The ring's shallow collar is fixed, so the dispenser accepts only vessels within the stated diameter range. The dimensions given—600 mm high, 120 mm wide and 17 mm deep—describe a tall, slim unit that occupies minimal counter space while holding a substantial stack of cups.

No controls are fitted; the dispenser operates purely by gravity and the mechanical collar.

The 70-98 mm diameter range allows standardised catering cups and glasses from 350 ml to 950 ml to be used. The 600 mm height means the dispenser can hold enough vessels for a busy service without needing frequent refills. The 17 mm depth and 120 mm width ensure it fits neatly against a wall or between other equipment without overhanging the worktop edge.

Cleaning is straightforward: wipe the stainless-steel body with a damp cloth and mild detergent. The shallow collar at the base should be checked periodically to ensure no debris has collected that could obstruct the release of cups.

The B22 is a single model; no variants are listed.

The dispenser is categorised under cup and glass dispensing equipment in the BHS-F professional catering range.