Disposable cup and glass dispenser BHS.LV-F BHS460001

A cup dispenser organises disposable cups in a vertical stack so that each cup is held by its rim and released one at a time. The stack rests on a shallow steel collar; when the operator pulls the bottom cup, the collar flexes slightly and the cup drops free while the next cup is caught by its rim. This gravity-fed system keeps the cups aligned and prevents jamming, giving a steady supply without manual sorting or restacking.

To use the B21, the operator loads the stack from the top, pressing each cup down until it seats on the collar. The dispenser is then ready; pulling the bottom cup releases it cleanly. No power or adjustment is required, so the unit can be mounted on a wall or placed on a worktop wherever cups are needed.

The body is made of polished stainless steel, chosen for its resistance to corrosion and ease of cleaning in a busy catering environment. A single steel ring forms the shallow collar that supports the cups by their rims. The collar's diameter accepts cups from 58 mm to 80 mm, corresponding to capacities of 180 ml to 300 ml.

The dispenser's footprint is 600 mm wide, 136 mm deep and 106 mm high, with a minimal 7 mm projection at the back for mounting. These dimensions allow it to fit above a counter or beside a drinks station without intruding into the work space.

Cleaning is straightforward: the smooth stainless-steel surfaces can be wiped with a damp cloth and sanitiser. The shallow collar is designed to be removed for thorough cleaning, preventing build-up of dust or residue between the cups and the metal.

The B21 is a single model without variants, suitable for any catering operation that uses disposable cups in the specified diameter range.