Disposable cup and glass dispenser BHS.LV-F BHS410014

A cup holder built for the pace of a professional kitchen, the BHS-F B16 keeps glasses steady on any worktop without drilling or permanent fixings. The holder works by gripping the rim of the glass between an adjustable collar and a silicone ring. The collar slides along a metal rail, opening from 76 mm to 117 mm to accept tumblers, pint glasses, latte glasses and most standard catering sizes. Once the glass is seated, the silicone ring presses lightly against the sides, preventing slippage while protecting the glass from metal contact. No power, no moving parts, no heat—just a simple mechanical grip that holds the glass until the operator lifts it out. Using the holder takes three steps. First, slide the collar along the rail to match the diameter of the glass. Second, lower the glass into the opening until the rim rests on the silicone ring. Third, release the glass; the ring and collar hold it securely. When the glass is no longer needed, lift it straight up to remove it. The same process repeats for every glass, regardless of size within the 200–950 ml range. The body is a single piece of metal, finished for durability and easy cleaning. It mounts on worktops, shelves or cupboard fronts using the visible collar and a single fixing point at the rear. The installation dimension of 558 mm allows the holder to span standard worktop depths without overhang, while the 102 mm detail keeps the unit compact enough to fit between other equipment. Controls are limited to the sliding collar, which the operator adjusts by hand. No knobs, no levers, no settings—just a friction fit that stays where it is set until the next glass is loaded. The 138 mm by 28 mm collar dimension determines the maximum glass diameter the holder can accept. The 558 mm installation length sets the space it occupies on the worktop, while the 102 mm depth keeps the footprint small. The 76–117 mm adjustment range opens the holder to most catering glass sizes, and the 200–950 ml capacity covers everything from espresso cups to large tumblers. The stainless-steel collar wipes clean with a damp cloth between shifts without trapping residue or odours. The metal body wipes clean with a damp cloth; the silicone ring can be removed for washing if needed. No crevices or moving parts trap food or liquid, so upkeep is limited to surface cleaning after each shift. The B16 is a single model with no variants. It is not a spare part for other equipment and does not fit specific makes of machinery. The holder is listed in the BHS-F catalogue under worktop accessories for catering and hospitality.