Disposable cup and glass dispenser BHS.LV-F BHS410001

A cup holder designed for professional catering worktops, the BHS-F B11 organises glasses and cups without occupying counter space. The unit mounts directly into a prepared cut-out, securing beneath the worktop surface with a durable plastic pipe. This method keeps the holder flush with the worktop, preventing spills and freeing up space for food preparation or service. The holder adjusts to accommodate different glass diameters, expanding from 60 mm to 120 mm. A silicone ring lines the interior, gripping the glass to prevent slipping while protecting fragile rims. This flexibility allows the holder to secure anything from small espresso cups to large tumblers, covering volumes from 120 ml to 1300 ml. The ring also dampens noise, reducing clinks when glasses are placed or removed during busy service. Installation requires a 138 mm cut-out in the worktop. Once the pipe is inserted, it locks into place, creating a stable anchor that resists movement even when glasses are removed quickly. The holder's low profile, at 40 mm height, ensures it does not interfere with other equipment or utensils on the worktop. Once the worktop cut-out is made, the holder slides in and locks without tools, keeping hands free for pouring or plating. The operator selects the appropriate glass, aligns it with the holder, and presses down until the silicone ring grips the sides. The glass remains secure until lifted out, allowing hands-free access during service. No controls are fitted; the holder functions purely as a mechanical support. Constructed from durable plastic, the holder resists cracking and discolouration from frequent use and cleaning. The silicone ring can be removed for washing, preventing residue build-up that could affect grip or hygiene. Regular wiping of the plastic pipe and worktop cut-out maintains appearance and prevents debris from accumulating in the mounting area. The holder's footprint is minimal, with a length of 572 mm and a depth of 170 mm, making it suitable for tight worktop layouts. Its weight ensures stability without adding significant load to the worktop structure. The 138 mm cut-out requirement dictates the worktop thickness and material, as thinner or softer surfaces may not provide adequate support. This model is a single variant, designed for worktop installation. It does not fit specific equipment makes but adapts to any worktop with the required cut-out dimensions.