Dishwashing sink Novameta PV1-PRO-120/70/90

A stainless steel worktop built to stand between the dishwasher and the washing-up area, giving a continuous run of work surface and a deep sink for pre-rinsing and soaking. The principle is simple: a single sheet of metal forms both the worktop and the sink basin, eliminating seams where dirt can collect. The sink is set into the worktop rather than mounted beneath, so the rim is level with the surface and dishes slide straight in without lifting. A raised splash-back at the rear keeps water off the wall and off the operator's back. To use the unit, the operator loads dirty dishes onto the worktop, scrapes and stacks them, then slides them into the sink for a hot rinse under the tap. After soaking, dishes move straight into the dishwasher rack without leaving the worktop. The shelf beneath holds detergent, brushes and a waste bin, keeping everything within reach. Construction is all stainless steel, welded and polished to a smooth finish. The worktop is a single sheet with a rolled edge for strength and safety. The sink is deep enough to submerge large trays and has a central drain hole with a strainer to catch food debris. Stainless-steel legs slide smoothly under the sink, letting you steady the worktop even when the kitchen floor slopes beneath prep stations or walk-in refrigerators. The shelf beneath the worktop is available in two versions: a solid reinforced shelf for heavy loads such as stacks of plates, or a grid shelf that allows air circulation and drainage if wet items are stored. The footprint of 1200 mm by 700 mm fits standard kitchen layouts, matching the width of most commercial dishwashers and leaving enough space for a full rack on either side. The height of 900 mm aligns with most worktops and sinks, so the operator does not have to bend or stretch. Cleaning is straightforward: the smooth stainless steel surface wipes clean with a cloth and detergent. The sink strainer lifts out for emptying, and the drain hole can be flushed with hot water to clear debris. The shelf, whether solid or grid, is removable for thorough cleaning underneath. The unit is placed in the catalogue under ‘Prep & Wash-up Tables' alongside other stainless steel workstations for the dishwashing area.