Cutlery polisher FRUCOSOL FMC-2000

A degreaser machine dissolves stubborn carbon deposits and grease by circulating heated detergent solution around kitchen tools. The tank holds the liquid at a controlled temperature, softening burnt residues so they lift away without scrubbing. A pump or convection currents keep the solution moving, ensuring even contact with every surface submerged.

To operate the FRUCOSOL FMC-2000, fill the 420 L tank with water and add the non-toxic, biodegradable detergent. Switch the machine on; the heating element raises the temperature to 75 °C. Load baskets or racks with tools, lower them into the tank, and set the timer according to how heavily soiled the items are. Once the cycle finishes, remove the tools and rinse them under a tap to clear any remaining detergent.

The unit is built as a single stainless-steel tank mounted on a sturdy frame. The exterior dimensions of 1305 mm high, 705 mm wide and 1060 mm deep allow it to stand on a worktop or dedicated floor space in a wash-up area. A 1.4 kW heating element draws power from a 230 V or 110 V supply, switching automatically between 50 Hz and 60 Hz mains frequencies. The 131 kg weight requires two operators to move the machine safely, and fixed castors or a trolley are recommended for repositioning.

Controls consist of an on-off switch, a temperature setting fixed at 75 °C, and a timer that lets the operator match soak duration to the level of soiling. The 420 L volume accommodates large batches of utensils, reducing the number of cycles needed during a busy service. The 75 °C temperature is high enough to break down grease polymers without damaging most metal tools, while the 230-110 V dual-voltage capability allows the machine to connect to standard UK or continental electrical circuits.

Cleaning involves draining the tank after each shift, wiping down the interior with a soft cloth, and rinsing to remove detergent residue. The stainless-steel construction resists corrosion from the alkaline solution, and the smooth surfaces prevent grease from clinging. No additional maintenance is specified beyond routine tank emptying and wiping.

The catalogue places the FMC-2000 in the ware-washing section alongside other large-capacity cleaning equipment for professional kitchens.