Cotton candy, popcorn and chocolate equipment Neumarker L00-51558

A mobile workstation built to hold a cotton candy machine at a comfortable working height, this Neumarker cart lets the operator spin sugar into fine threads without lifting the appliance off the floor. The cart's top surface is recessed so the machine base sits below the rim, preventing the unit from sliding during vigorous spinning and keeping the centre of gravity low.

The cart itself is a welded frame on lockable castors, allowing the entire station to be rolled into position at the start of service and secured in place. Once the machine is lowered into the sunken base, the operator can concentrate on feeding sugar into the spinning head and guiding the threads onto paper cones without the cart shifting underfoot.

Assembly is straightforward: the cart arrives fully welded, requiring only the castors to be attached. The sunken base is sized specifically for Econo Floss machines, so no additional brackets or clamps are needed. When service ends, the machine is lifted out, the cart can be wheeled into storage, and the worktop wiped clean of sugar residue.

The frame is constructed from mild steel tubing finished in a durable powder-coated paint, chosen for its resistance to the sticky environment of a candy operation. The worktop is a single sheet of stainless steel, raised at the edges to contain minor spills and simplify cleaning.

Controls are limited to the four castors, each fitted with a foot-operated brake. Engaging the brakes locks the cart in place, while releasing them allows the unit to be moved by a single operator.

The dimensions of 800 mm wide by 650 mm deep by 720 mm high create a footprint that fits through standard kitchen doorways and under most service hatches. The 20 kg weight keeps the cart stable during use but light enough for one person to manoeuvre when empty. The sunken base does not add to the overall height, so the machine sits at the same ergonomic level as if it were placed on a solid counter.

Cleaning involves wiping the stainless-steel worktop with a damp cloth to remove sugar and colouring residue, and occasionally checking the castor brakes for proper engagement. The powder-coated frame can be wiped down with a mild detergent, avoiding abrasive cleaners that could damage the finish.

This cart is designed exclusively for Econo Floss cotton candy machines and is not compatible with other brands or models.

In the Neumarker catalogue, this item is listed under Mobile Workstations for Confectionery Equipment.