Coffee table accessory BHS.LV-F BHS400010 / BHS400014

A wall-mounted cup holder keeps stemware and tumblers organised in three adjustable tiers, each sized for a different glass diameter. The top edge is fitted with hooks that suspend the unit from a rail or shelf bracket, freeing worktop space while keeping glasses within reach of bar staff.

The holder is built as a stainless-steel frame with three separate compartments. Each compartment holds glasses by their rims, preventing contact between the bowls and reducing the risk of chips or scratches. The compartments are sized for three diameter ranges: 60–72 mm, 72–82 mm and 80–90 mm, so each tier can be set for a specific glass type without mixing.

To load the holder, the operator slides the glasses rim-first into the appropriate compartment until the rim rests on the support ledge. The glasses hang vertically, their bases clear of the shelf below, so they can be lifted out without tilting or jostling. The sequence is reversed for unloading: each glass is lifted straight up and out, leaving the next one undisturbed.

The frame is made of stainless steel with a choice of silver or black finish. Overall dimensions are 140 mm deep, 375 mm wide and 570 mm high, giving a narrow footprint that fits between shelves or under overhead cupboards.

No controls are fitted; the unit is passive and requires no power or settings.

The 140 mm depth means the holder projects only a short distance from the wall, so it does not obstruct traffic behind the bar. The 375 mm width allows three glasses side by side in each tier, while the 570 mm height keeps the top tier within comfortable reach for most staff. The stainless-steel construction resists corrosion from spills and steam, and the smooth finish wipes clean with a damp cloth.

Two article numbers are offered: BHS400010 in silver and BHS400014 in black.

The holder is listed in the BHS-F catalogue under bar accessories and glass storage.