Cocktail straw organizer BHS.LV-F BHS410304

A stainless steel straw dispenser designed for hygienic, one-at-a-time dispensing of individually unwrapped drinking straws. Straw dispensers of this type use a spring-loaded or gravity-fed mechanism that separates a single straw from the stack. When the operator presses the lever or pulls the front straw, the mechanism releases only one straw at a time, preventing contamination and reducing waste. The straws rest vertically inside the housing, so each straw slides down as the one above is taken, ensuring the next straw is always ready without manual sorting. To use the dispenser, the operator loads up to 250 straws into the top opening, ensuring they are aligned vertically. The straws must match the specified length and diameter to move smoothly through the mechanism. Once loaded, the dispenser is ready for service. Customers or staff activate the dispensing mechanism by pressing a lever or pulling the front straw, which releases a single straw for immediate use. The process repeats automatically as straws are taken, maintaining a consistent supply without manual intervention. The dispenser is constructed from stainless steel, chosen for its resistance to corrosion and ease of cleaning in a food-service environment. The housing is a single, seamless unit with a clear front opening that allows staff to monitor the remaining straw count at a glance. The unit measures 311 mm high, 140 mm wide and 178 mm deep, giving it a compact footprint that fits on most worktops or can be wall-mounted if required. The capacity of up to 250 straws reduces the frequency of refills during service, while the specified straw length range of 230 to 305 mm and 7 mm diameter ensures compatibility with standard drinking straws used in catering. Cleaning is straightforward: the stainless steel surface can be wiped down with a damp cloth and sanitiser. The dispensing mechanism is accessible for occasional deep cleaning, allowing staff to remove any straw debris that may accumulate over time. The dispensing mechanism is designed to be cleaned in place with a damp cloth, keeping the stainless steel surface hygienic without interrupting service during peak hours. The T22E is a single model with no variants. It is a standalone unit and does not require additional accessories or compatible equipment to function.