Capacitor LF L3068083

This capacitor provides the necessary electrical boost to start motors in professional dishwashers and washing machines. When power is applied, it supplies a quick burst of current to the motor windings, generating the magnetic field that initiates rotation. Without this component, the motor would not turn, preventing pumps and wash arms from operating. The capacitor recharges during each cycle, preparing for the next start sequence.

Installation involves disconnecting the appliance from the power supply, removing the side or rear panel, and detaching the old capacitor from its terminals. The new unit is secured in the mounting bracket, and wires are reconnected, ensuring correct polarity as indicated on the casing. After reassembling the panel and restoring power, the appliance should be tested to confirm smooth motor operation and consistent performance.

The component is a sealed aluminium cylinder, designed to resist moisture. Its dimensions—35 mm in diameter and 71 mm in height—allow it to fit neatly behind control panels in under-counter and hood-type models. With a capacitance of 16 microfarads and a 450 V rating, it meets the requirements of single-phase motors commonly used in commercial ware-washing equipment.

The casing displays the capacitance value, which should be cross-checked with the appliance's wiring diagram before fitting. The 450 V rating ensures safe operation with the standard mains supply in British professional kitchens, offering protection against voltage fluctuations during motor start-up.

A 16 µF capacitance delivers the correct starting torque; insufficient capacitance may prevent the motor from turning, while excessive capacitance risks overheating the windings. The 450 V rating guards against mains transients, and the 50/60 Hz specification confirms compatibility with both British and continental power systems. The 35 mm diameter and 71 mm height define the space it occupies, ensuring it can be installed without interfering with other parts.

Maintenance is minimal: the casing should be wiped with a dry cloth, avoiding solvents or water near the terminals. As it has no moving parts, no adjustments are needed, but it should be checked for signs of bulging or electrolyte leakage during routine servicing.

This is a direct replacement part with no alternative versions available. It is compatible with over 40 commercial brands, including ADLER, AMIKA, ARISTARCO, ARISTON, BONNET, CANDY, CEADO, CIMSA-FABAR, COLGED, COMENDA, DESCO, DEXION, DIHR, ELETTROBAR, ELFRAMO, EMMEPI, EUROWASH, HOBART, HOONVED, HOOVER, INDESIT, JEMI, KELVINATOR, KOMEL, LAINOX, MACAP, MARELS, MAZZER, MBM, MEIKO, MODULAR, NUOVA SIMONELLI, QUAMAR, SAMMIC, SMEG, UNIVERBAR, WHIRLPOOL, and ZANUSSI.

Listed under Electrical Components, Capacitors in the catalogue.