Work table without shelf Novameta BHS-PRV-1300/600/900

A stainless steel worktop table provides a rigid, hygienic surface for food preparation, plating and assembly in professional kitchens. The flat top is the primary work area, supported by a frame that bears the load of ingredients, utensils and small appliances without flexing. Because the table has no shelf beneath, the space underneath remains open for mobile racks, bins or cleaning access, keeping the floor clear and the workflow unobstructed.

The operator places ingredients, tools and containers directly on the worktop, organising them across the full 1300 mm width. The 600 mm depth gives enough room for parallel tasks—chopping on one side, garnishing on the other—while the 900 mm height matches standard worktop levels, allowing comfortable standing work without bending or reaching. The table stands on adjustable feet that level it on uneven floors and prevent rocking during use.

Construction is stainless steel throughout, chosen for corrosion resistance and ease of cleaning. The worktop is a single sheet with rolled edges to eliminate sharp corners, and the frame is welded for rigidity. No shelf is fitted, so the underside is open and accessible for cleaning or for positioning additional equipment.

The table requires no controls; it is ready for immediate use once positioned. Its dimensions—1300 mm long, 600 mm deep and 900 mm high—determine the space it occupies on the kitchen floor and the area available for food preparation. The open underside allows integration with mobile units or fixed services without modification.

Cleaning is straightforward: the stainless steel surface is wiped down with sanitiser after each service, and the open underside is swept or mopped without obstruction. The absence of a shelf removes a common dirt trap, reducing maintenance time.

This model is a single configuration without variants. It is catalogued under professional kitchen tables and work surfaces.