Water mixer with two water inlets MONOLITH R0102020211

A wall-mounted kitchen faucet delivers water directly from the wall, freeing the worktop for pots and pans. The swinging spout pivots left and right, letting the operator direct the flow between sinks or fill vessels placed to either side without moving them. This arrangement keeps the tap clear of the work surface, reducing clutter and making cleaning easier.

The mixer combines hot and cold water inside the body before it leaves the spout, so the operator adjusts the temperature by turning the single handle. A two-hole installation fixes the faucet to the wall at the correct spacing, ensuring a secure mount that does not twist or sag over time. The centre distance of 155 mm, adjustable within a 20 mm range, matches standard British plumbing layouts, so the faucet fits existing pipework without extra adapters.

To use the faucet, the operator turns the handle to open the valve and set the temperature. The spout swings through an arc, allowing the water to be aimed precisely where needed. When finished, the handle is turned back to shut off the flow, and the spout can be left in any position.

The faucet is constructed with a plastic handle made from PA6, a material chosen for its resistance to heat and chemicals found in professional kitchens. The body and spout are mounted on the wall, with the two fixing points spaced to match the specified centre distance. The swinging mechanism allows smooth movement without tools or adjustments.

The single handle controls both flow and temperature, simplifying operation during busy service. The wall-mounted design eliminates the need for a deck-mounted base, reducing the space taken up on the worktop and making it easier to clean around the sink area.

The adjustable centre distance of 155 mm ±20 mm ensures compatibility with most standard plumbing setups, avoiding the need for additional fittings or modifications. The faucet is installed by securing it to the wall at the two fixing points, aligning the spout with the sink or sinks below.

Cleaning involves wiping the spout and handle with a damp cloth to remove water marks and food splashes. The PA6 handle resists staining and does not require special cleaners. The wall-mounted design means there are no crevices around the base where dirt can collect, making daily upkeep straightforward.

This faucet is categorised under commercial kitchen taps and mixers, suitable for professional catering environments where durability and ease of use are essential.