Water mixer with two water inlets MONOLITH R0102010211

A tap designed for continuous use in professional kitchens, the Monolith Faucet 10211 delivers water through a single spout controlled by a round handle. The handle turns smoothly, allowing the operator to adjust flow and temperature in fine increments without sudden changes or drips. This precision is essential where large volumes of water are drawn for cleaning, food preparation and equipment rinsing, and where consistent temperature prevents scalding or uneven washing. The sequence of use is straightforward: the operator turns the handle clockwise to open the valve, anticlockwise to close it. The round grip gives a secure hold even with wet or soapy hands, reducing the risk of slips during busy service. Once set, the handle stays in position until deliberately moved, so the chosen flow and temperature remain stable until the next adjustment. Construction centres on a cylindrical body with a diameter of 18 mm at the inlet and 300 mm overall length. The 150 mm mounting spacing matches standard worktop cut-outs, ensuring a secure fit without additional brackets or adapters. The materials are chosen for resistance to corrosion and repeated cleaning: stainless steel for the body, handle and spout, and internal seals that withstand the temperatures and pressures of commercial water systems. The single round handle controls both flow and temperature, eliminating the need for separate levers. The operator turns it to the left for hot water, to the right for cold, and to an intermediate position for a blend. The mechanism inside the tap mixes the two supplies before the water reaches the spout, so the temperature at the outlet is uniform and predictable. The 150 mm mounting spacing means the tap fits standard worktop holes without modification, simplifying installation in new or refurbished kitchens. The 300 mm overall length places the spout far enough from the wall to clear deep sinks and large pots, while the 18 mm inlet diameter connects to standard water supply pipes without reducers or extenders. The single-lever ceramic cartridge sheds lime and grease with a damp cloth, so the spout stays free of build-up that can slow water flow during peak service. The stainless steel surfaces can be wiped with detergent or sanitiser without risk of staining or corrosion. The round handle and smooth spout have no crevices where dirt or limescale can accumulate, so daily cleaning is quick and thorough. The internal seals are accessible for replacement without removing the tap from the worktop, reducing downtime during maintenance. The Faucet 10211 is catalogued under commercial taps and accessories for professional kitchens, utility areas and dining zones.