Water mixer with two water inlets MONOLITH R0102010208

A wall-mounted tap delivers water directly from the supply line through a spout that swings side to side. The swing action lets the operator direct the flow over a wide area of the sink without moving the entire fixture, making it easier to rinse large pots, fill tall containers or clean the corners of deep basins.

The Faucet 10208 from MONOLITH is a two-hole design: one hole carries the water pipe, the other holds the control handle. The spout is shaped in a gentle curve, allowing it to reach further into the sink while still clearing the back edge. A round handle gives a firm grip and turns smoothly to open or close the valve.

To use the tap, the operator turns the handle clockwise to start the flow and anticlockwise to stop it. The spout swings left or right by hand, covering the full width of the sink. When the task is finished, the handle is turned fully off to prevent drips.

The tap is fixed to the wall with two mounting points spaced 150 mm apart. The spout measures 250 mm from the wall face to the outlet, with an 18 mm diameter pipe. Construction is in materials suitable for continuous use in a professional kitchen environment.

The 150 mm wheelbase matches standard spacing on many commercial sinks, allowing straightforward installation without extra brackets or adapters.

Cleaning involves wiping the spout and handle with a damp cloth to remove water marks and food residues. The valve mechanism should be checked periodically for smooth operation and any signs of wear.