Water mixer with two water inlets MONOLITH R0102010106

A tap designed for the demands of a professional kitchen, the MONOLITH Faucet 10106 delivers water with the precision a busy service requires. The flow is governed by a round handle that turns smoothly, allowing the operator to adjust from a trickle to a full stream without overshooting. This control is essential when filling pots, rinsing produce or cleaning equipment, where too much force can waste water and too little slows the work down.

The tap mounts on a fixed wheelbase that spaces the inlet connections 203.20 mm apart. This standardised spacing ensures the tap sits level and secure on the worktop or sink, resisting the sideways forces of daily use. A stable base also simplifies installation, reducing the need for shimming or re-drilling.

The body is sized to fit a 20 mm inlet and extends 250 mm from the wall, placing the spout at a comfortable reach over the sink or prep area. The length keeps the operator's hands clear of the splash zone while still directing the water where it is needed.

Cleaning follows from the construction: the round handle and smooth body have no crevices that trap food debris or grease, so a daily wipe with a damp cloth keeps the tap hygienic. The wheelbase and inlet connections are accessible from below the worktop, allowing periodic checks for leaks or scale build-up without removing the tap.

The Faucet 10106 is catalogued under commercial taps and fittings, where it serves as a direct replacement for taps with the same wheelbase and inlet diameter.