Choose category
Choose category
Your Cart

Water mixer with two inlets and shower MONOLITH P0102020210

Water mixer with two inlets and shower MONOLITH P0102020210
Water mixer with two inlets and shower MONOLITH P0102020210
Water mixer with two inlets and shower MONOLITH P0102020210
Water mixer with two inlets and shower MONOLITH P0102020210
Product images are illustrative
Product images are illustrative. The videos in the product description are for informational purposes only, so the information contained in them may differ from the product itself.

Technical data

Attributes
ARTICLE P0102020210
Water mixer with two inlets and shower MONOLITH P0102020210

Two-hole pre-rinsing unit for wall mounting with a swivelling spout.

  • : MONOLITH
  • Article number: P0102020210
Is available
317.00€
with VAT: 383.57€

A pre-rinse faucet directs a forceful jet of hot water to loosen food debris from pots, pans and utensils before they enter the dishwasher or sink. The water is supplied under mains pressure, so the spray hand converts that pressure into a concentrated stream without the need for a booster pump. The swivelling spout lets the operator direct the jet across the full width of the sink, while the clinical-type lever is designed for single-handed operation, allowing the other hand to hold the item being rinsed. The sequence begins by opening the lever fully to release the maximum flow. The operator then adjusts the angle of the spout and the position of the spray hand to target stubborn residues. After rinsing, the lever is closed with a quarter-turn, stopping the flow instantly. The fixed wheelbase of 155 mm ensures the faucet fits standard pre-drilled sink decks, while the ±20 mm tolerance accommodates minor variations in installation. The clinical-type lever is made of PA6 plastic, chosen for its resistance to heat, chemicals and repeated actuation. All wetted parts are designed to withstand the high temperatures and detergents typical of professional cleaning cycles. The single control is the clinical lever, which regulates both the flow rate and the temperature of the water by mixing hot and cold supplies at the point of use. No additional settings are required, simplifying operation during peak service periods. The PA6 plastic lever shrugs off grease and sanitiser so the control stays smooth and sterile after every service. The PA6 lever and spray hand can be wiped down with a damp cloth and mild detergent after each shift. The swivelling spout should be checked periodically for mineral deposits, which can be removed with a descaling solution. The fixed wheelbase and tolerance simplify installation, but the unit should be inspected annually for leaks at the connections to maintain hygiene standards. The P20210 is a single model with no variants. It is categorised under pre-rinse fittings in the MONOLITH professional kitchen equipment range.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good

Delivery and warranty

Free Shipping
Free delivery throughout Latvia over 200€ up to 30 kg. Does not apply to promotional items. Learn more.
Best Typography Options
12-month warranty for professional equipment, 24 months for “home” products. Learn more.
Professional Maintenance and Repair
A wide range of HoReCa spare parts and knowledgeable craftsmen. Learn more.

Large purchase volume or don't know where to start?