Water mixer with shower MONOLITH R0101020136

A pre-rinse shower delivers a concentrated jet of hot and cold water to loosen food debris from pots, pans and utensils before they enter the wash cycle. The mixer valve blends the two supplies into a single stream, letting the operator adjust temperature without moving between taps. The shower head, mounted at the end of a flexible hose, directs the flow precisely where it is needed, reducing water waste and speeding the cleaning process.

The unit installs through a single hole in the worktop, leaving the surrounding area clear for other equipment. The operator turns the round handle to open the valve, then pulls the hose down to the sink or basin. The C-shaped spout keeps the hose clear of the work surface while it is not in use, preventing kinks and tripping hazards. A hard shower head resists impact and abrasion from heavy use, maintaining a consistent spray pattern over time.

Construction is a single assembly that combines the mixer, spout and shower in one unit. The ø18 mm diameter and 300 mm reach of the spout determine the space it occupies above the worktop and the clearance needed for the hose to move freely. The round handle provides a secure grip, allowing quick adjustment even when hands are wet or soapy.

Cleaning is limited to wiping the exposed surfaces with a damp cloth to remove grease and limescale. The hard shower head can be detached for more thorough cleaning if required, though the entry does not specify a method. The mixer valve itself requires no maintenance beyond occasional descaling if water hardness is high in the area.

The product is listed under professional kitchen taps and pre-rinse units in the catalogue.