Water mixer with shower MONOLITH R0101020114

A pre-rinse shower combines hot and cold water at the tap to deliver a steady, adjustable jet that loosens food debris from pots, trays and utensils before they enter the dishwasher. The mixer valve blends the two supplies, while the shower head breaks the flow into fine droplets that cover a wide area without splashing. This method reduces scrubbing time and water use compared with a fixed tap or hose, making it a standard fixture above commercial sinks.

The MONOLITH Shower with Mixer 20114 mounts on a vertical support tube that carries both water lines. A swinging spout at the centre of the tube lets the operator direct the jet left or right without moving the whole unit, so the spray reaches every corner of the sink. The round handle gives precise control over temperature and flow rate, while the Basic shower hand—attached to a flexible hose—extends the reach for rinsing large or awkward items.

To use the unit, turn the handle to open the mixer valve and set the desired temperature. Pull the spout into position above the sink, then squeeze the trigger on the shower hand to start the jet. Move the hand across the surface being cleaned, adjusting the angle of the spout as needed. When finished, release the trigger and return the spout to its resting position.

Construction is a support tube that carries the water lines, a swinging spout mounted at its midpoint, a round mixer handle, and a Basic shower hand with flexible hose. The materials are chosen for frequent contact with water and cleaning chemicals in a professional kitchen.

The controls consist of a single round handle that adjusts both temperature and flow rate, and a trigger on the shower hand that starts and stops the jet without altering the mixer settings.

The swinging spout and balanced support tube allow the operator to cover the entire sink without repositioning the unit, while the round handle provides smooth, repeatable adjustments. The Basic shower hand extends the reach for oversized items, and the flexible hose prevents kinks that would interrupt the flow.

Cleaning involves wiping the spout, handle and shower head after each shift to remove water deposits and food residue. The flexible hose should be inspected regularly for wear or damage, and the mixer valve checked for smooth operation to maintain consistent temperature control.

The MONOLITH Shower with Mixer 20114 is listed in the catalogue under pre-rinse solutions for professional kitchens and food service environments.