Water mixer MONOLITH R0101020109

A mixer tap combines hot and cold water through a single spout, letting the operator set the temperature and flow with one movement. The water streams meet inside the body of the tap, so the temperature adjusts instantly without the lag of separate pipes. This design keeps the worktop clear and speeds up filling pots, rinsing vegetables or cleaning utensils under running water.

The tap is installed through a single hole in the worktop. The spout curves in a U shape, giving clearance above deep sinks or large containers. Round handles on either side let the operator turn the water on and off and adjust the mix without changing grip. The handles are positioned close to the spout, so the operator can control the flow while holding a pot or colander with the other hand.

The tap body measures 410 mm from front to back, 170 mm across the handles and stands 100 mm above the worktop. The spout has an 18 mm diameter and extends 180 mm from the base, giving a long reach over the sink. The footprint allows the tap to be mounted on standard worktops without interfering with adjacent hobs or cupboards.

The tap is constructed from materials chosen for resistance to corrosion and frequent use. The body and spout are solid, while the handles are designed for a secure grip even when wet. The single-hole installation simplifies plumbing and reduces the number of joints that could leak over time.

Cleaning involves wiping the spout and handles with a damp cloth to remove water marks and food splashes. The smooth surfaces and lack of crevices prevent limescale build-up, so the tap remains easy to operate and keeps its appearance between deeper cleans.

The tap is listed in the catalogue under commercial kitchen taps and fittings.