Stainless steel furniture module BHS-HoReCa 943605045F

A cupboard with drawers organises kitchen essentials at worktop height, keeping utensils, ingredients or small equipment within arm's reach without bending or stretching. The drawers slide out fully so every item is visible and accessible; closed, they shield contents from dust, splashes and accidental knocks. This arrangement replaces open shelves or wall-mounted racks, freeing wall space for hobs, taps or extractors while keeping the work surface clear for food preparation.

The unit stands on four adjustable feet, allowing the operator to level it on uneven floors and to raise it slightly for mopping underneath. Each drawer runs on full-extension slides, so the entire depth is usable and nothing is lost at the back. The slides are mounted inside the cupboard carcass, protecting them from spills and reducing the risk of jamming.

To use the cupboard, the operator pulls the drawer handle, loads or unloads the items, and pushes the drawer closed until it clicks. The slides are soft-close, so the drawer shuts silently without slamming. No power or controls are required; the unit is purely mechanical.

The cupboard is constructed from stainless steel, chosen for its resistance to corrosion, heat and frequent cleaning with detergents. The material does not absorb odours or harbour bacteria, meeting the hygiene standards of professional kitchens. The exterior is brushed to reduce visible fingerprints and scratches.

Two widths are available: 450 mm and 640 mm. The 640 mm version is priced approximately 5% higher than the 450 mm version. Both share the same 660 mm height and 540 mm depth, fitting under standard worktops or alongside other under-counter appliances.

The footprint of 450 mm or 640 mm by 540 mm determines the floor space the cupboard occupies. The 660 mm height places the top surface at a comfortable working level, allowing the operator to reach the highest drawer without stooping. The unit is freestanding and can be repositioned as kitchen layouts change.

Cleaning is straightforward: wipe the stainless steel surfaces with a damp cloth and mild detergent, then dry to prevent water spots. The drawers can be removed for thorough cleaning or to access the slides. Avoid abrasive pads that could scratch the brushed finish. Regular inspection of the slides ensures smooth operation and prevents wear.