Choose category
Choose category
Filter
Your Cart

FAGOR 2

FAGOR dishwasher spare parts — original and compatible spare parts for FAGOR professional dishwashing and glasswashing machines, designed for the maintenance, repair and service life extension of FAGOR dishwashers in restaurants, hotels, canteens and catering establishments. FAGOR is a Spanish manufacturer with a wide range of professional kitchen equipment that includes not only convection ovens but also professional dishwashers — from compact under-counter models to dome and conveyor-type dishwashers. FAGOR dishwashers are popular in the HoReCa sector for their practical design and efficient washing. BHS offers FAGOR dishwasher spare parts along with a wide range of dishwasher spare parts.

BHS specialists help find the necessary spare parts for a specific FAGOR 2 dishwasher model. Also check HOBART spare parts and WINTERHALTER spare parts.

Article number: L1186362
An O-ring is a circular seal that compresses between two surfaces to prevent leaks of water, steam o..
Is available
0.89€
with VAT: 1.08€
Article number: L5113499
A flexible PVC tube carries liquids between catering appliances, beverage dispensers and water suppl..
Is available
3.00€
with VAT: 3.63€
Article number: 3449462
A hose clamp holds flexible tubing firmly on a rigid connector, stopping leaks and keeping water or ..
Is available
3.19€
with VAT: 3.86€
Article number: 3449453
A hose tie secures the flexible water supply lines that feed professional dishwashers, glasswashers ..
Is available
3.99€
with VAT: 4.83€
Article number: 3449455
A hose tie secures flexible drainage or supply hoses where they connect to a commercial dishwasher, ..
Is available
4.39€
with VAT: 5.31€
Article number: 2101254
A salt container cap maintains the water-softening system in professional dishwashers by sealing the..
Is available
8.01€
with VAT: 9.69€
Article number: L3120007
A two-way solenoid valve directs the flow of water, steam or cleaning solution through professional ..
Is available
21.83€
with VAT: 26.41€
Article number: 3322260
A dishwasher timer governs the sequence of wash, rinse and drying cycles by mechanically switching c..
Is available
126.90€
with VAT: 153.55€
Article number: L3186426
An oven door gasket creates an airtight seal between the oven cavity and its door, preventing heat a..
Is available
229.79€
with VAT: 278.05€
Add to Cart
Buy
Showing 1 to 9 of 9 (1 Pages)

FAGOR dishwasher spare parts ensure stable and efficient operation of FAGOR equipment in restaurants and canteens. FAGOR dishwashers of Spanish manufacture are characterised by a practical design and easy maintenance — however, in intensive commercial operation, replacement of spare parts is inevitable, and timely maintenance significantly extends the service life of the equipment.

Main FAGOR dishwasher spare parts

The following spare parts are most frequently required for FAGOR dishwashers. Washing pump — circulates water in the washing chamber with sufficient pressure; wear occurs due to damage to ball bearings or cavitation. Rinsing pump — supplies rinsing water at 85°C temperature; a key element for HACCP washing requirements. Nozzles and rinsing arms — ensure even water distribution in the washing chamber; limescale deposits are a common cause of blockage; replacement is needed in case of mechanical damage. Door seals and gaskets — prevent water leakage; silicone seals harden and crack over time; regular inspection is necessary. Thermostat and heating element — maintain the normative temperature of rinsing water; replacement is required in case of temperature deviation. Also check out dishwasher spare parts.

FAGOR dishwasher model range

FAGOR manufactures various models of professional dishwashers. FAGOR under-counter — a compact dishwasher with an upward-opening lid; ideal for restaurants and smaller kitchens with limited space. FAGOR dome-type — a medium-capacity dome dishwasher; convenient for large dishes; offers a good power-to-size ratio. FAGOR front-loading dishwasher — front door opening; easy loading and unloading. FAGOR glasswasher — for bar glasses; compact size; fast washing cycle. FAGOR conveyor systems — for large kitchens with high dish turnover. Each model has specific spare parts — it is important to specify the model when ordering. Also check out SILANOS spare parts.

Pump operation diagnostics

FAGOR dishwasher pumps are the main mechanical components that require attention. Washing pump symptoms — reduced water pressure in the washing nozzles; noisy operation; slow start-up. Rinsing pump symptoms — dishes retain soap or detergent residue; reduced rinsing water pressure; insufficient rinsing temperature. Cavitation — air bubbles in the pump system; occurs if the water level in the tank is too low or the inlet nozzles are clogged. Foreign objects — bones, toothpicks and other small items can block the pump; regular cleaning of the filter mesh prevents this issue. BHS supplies FAGOR dishwasher pumps.

Descaling and water treatment

Limescale deposits are the main maintenance task for FAGOR dishwashers. Regular descaling — frequency as recommended by the manufacturer, depending on water hardness; irregular descaling reduces the efficiency of the heating element. Water softener — installation before the dishwasher; reduces limescale build-up in all parts of the system; a cost-effective solution in the long term. Descaling agent — use a product recommended or compatible with FAGOR; at the correct concentration; strong acidic agents can damage seals. Nozzle cleaning — in combination with descaling, weekly manual cleaning of nozzles prevents complete blockage. Also check out ELLTROBAR spare parts.

HoReCa usage scenarios

A restaurant with a FAGOR dome dishwasher — over 100 dish sets per day; weekly nozzle cleaning; BHS supplies pump and heating element spare parts. A bar with a FAGOR glasswasher — intensive glass washing; water softener for better glass cleaning quality.

Frequently asked questions

Do FAGOR 2 dishwasher spare parts differ from FAGOR 2 convection oven parts? Yes — this is a completely different equipment category with its own specific components; the equipment type and model must be specified. See Dishwasher Spare Parts.

How often should FAGOR 2 dishwasher door seals be replaced? With intensive use — once every 1–2 years; visual inspection every week; the seal must be elastic and free of cracks. Also check DIHR spare parts.

Why choose BHS?

BHS – Baltic HoReCa Solutions supplies professional equipment for restaurants, cafés, hotels and canteens: more than 20,000 products from many manufacturers. Our specialists help you choose the right equipment and spare parts for your kitchen or bar.

Delivery

We deliver across the European Union. Delivery time and cost depend on the order volume and destination — contact the BHS team for an exact price and lead time.

Filter