Serving bridge with 2 shelves Novameta BHS-LPL2-120-30-70

An upper shelf for a double worktop adds storage above the main bench without taking floor space. It holds ingredients, utensils or small appliances within arm's reach while keeping the work surface clear. The shelf is fixed to the wall or to uprights bolted to the bench, creating a second level that follows the length of the table. This arrangement keeps frequently used items visible and organised, reducing the need to bend or turn away from the work area.

The shelf is a flat platform supported by brackets or a continuous frame. Its depth is chosen to match the worktop below, so that items placed on it do not overhang and risk being knocked off. The height above the bench is set to clear the tallest appliance or container that will sit on the work surface, ensuring the operator can slide items underneath without obstruction. Because the shelf is open, air circulates freely, preventing condensation and keeping stored items dry.

To use the shelf, the operator first secures the brackets or frame to the wall or bench uprights at the required height. The shelf panel is then placed on the supports and fastened with screws or clamps. Once installed, the shelf is loaded with items that are light enough to be safely supported but heavy enough to stay in place during normal kitchen movement. The operator arranges items so that the most frequently used are closest to hand, reducing reaching and bending.

The shelf is made of AISI 304 stainless steel, a grade chosen for its resistance to corrosion and staining in a kitchen environment. The steel is welded and reinforced to prevent sagging under load, even when the shelf spans the full 1200 mm width. The surface is smooth and easy to wipe, with no crevices where food debris can collect.

The shelf measures 1200 mm in length, 300 mm in depth and 700 mm in height from the worktop. These dimensions allow it to sit above a standard 1200 mm double worktop without overhang, providing a stable platform that aligns with the bench below. The width can vary by up to 5% from the stated size to accommodate minor adjustments during installation.

Cleaning is straightforward: the shelf is wiped down with a damp cloth and mild detergent after each service. Because the steel is non-porous and the construction is seamless, there are no joints or corners where grease or moisture can accumulate. The shelf does not require disassembly for routine cleaning, and the smooth finish allows water to run off without pooling.

Custom sizes and designs are available by consulting Novameta specialists. The shelf can be manufactured to match non-standard worktop lengths or to fit specific kitchen layouts, ensuring a seamless integration with existing equipment.

The shelf is categorised as a worktop accessory, used to expand storage and organisation in professional kitchens.