Serving bridge with 1 shelf Novameta BHS-LPL1-110-30-40

An upper shelf for a professional worktable adds a second tier of storage above the main worktop, keeping ingredients, tools or plated dishes within arm's reach without cluttering the primary surface. The shelf is fixed to the uprights of the table frame, creating a stable platform that does not interfere with legroom or workflow beneath. Because it sits above eye level, it is used for items that are accessed frequently but do not need constant attention, freeing the worktop for active tasks such as chopping, plating or assembly.

The shelf is loaded by placing items directly onto its flat surface. No special sequence is required; the operator simply reaches up and sets down whatever is needed. Weight is distributed evenly across the welded frame, so there is no need to balance or centre loads. The height of 400 mm above the worktop allows standard gastronorm trays, cutting boards and small containers to be stored without obstruction, while still keeping the shelf low enough to be reached without stretching.

Constructed from AISI 304 stainless steel, the shelf is welded into a single rigid unit that resists sagging and corrosion. The 1100 mm length spans the full width of Table 1100, matching its footprint exactly. A width of 300 mm provides enough depth for most kitchen containers while keeping the shelf compact enough to fit in tight spaces. The shelf arrives ready to bolt onto the existing table uprights; no additional brackets or modifications are needed.

The only control is the fixing hardware, which secures the shelf to the table frame at the correct height. Once installed, the shelf requires no adjustment or calibration. Its flat surface has no moving parts, so operation is limited to loading and unloading.

A length of 1100 mm means the shelf can hold two full-size gastronorm trays side by side, or a single tray with space for smaller containers on either side. The 300 mm depth accommodates standard kitchen containers without overhang, while the 400 mm height above the worktop clears most hand tools and small appliances. The shelf's weight is kept low by the thin-gauge steel, making it easy to lift into place during installation, yet the welded construction ensures it remains rigid under load.

Cleaning is straightforward: the smooth stainless steel surface can be wiped down with a damp cloth or sanitised with standard kitchen cleaners. There are no seams or joints to trap debris, and the lack of moving parts means no disassembly is required. The shelf can be removed for deep cleaning by loosening the fixing bolts, but this is rarely necessary in daily use.

Custom sizes are available on request, allowing the shelf to be tailored to non-standard tables or specific kitchen layouts. The same AISI 304 steel and welded construction are used for bespoke orders, ensuring consistency in strength and hygiene.

This shelf is designed for use with Table 1100 and is listed in the Novameta catalogue under worktop accessories.