Service bridge with 3 shelves Novameta BHS-LPL3-70/30/100

An upper shelf converts vertical space above a worktop into organised storage without adding to the footprint. It mounts on the uprights of a catering table, raising plates, trays or ingredients above the work surface so they stay within reach but clear of the hob, sink or chopping area. The shelf itself is a flat platform; its strength comes from the steel frame that supports it and the welded joints that prevent racking under load.

The operator positions the shelf on the table's existing uprights, securing it with the supplied fixings. Once in place, it holds lightweight items that are used repeatedly during service: stacked plates, seasoning jars, utensils or small containers of mise en place. Because it is open, air circulates freely, keeping stored items visible and dry. The shelf does not move during use; it remains fixed at the chosen height, so everything on it stays at the same working level.

Constructed from AISI 304 stainless steel, the shelf is welded into a single unit for rigidity. The steel gauge is chosen to carry the expected load without sagging, while the welded corners eliminate weak points that could bend under repeated use. The surface is left uncoated, relying on the natural corrosion resistance of the alloy to withstand kitchen humidity and cleaning chemicals.

No controls are fitted; the shelf is a static storage platform. Its dimensions—700 mm wide, 300 mm deep and 1000 mm high—determine the space it occupies above the table. The width matches the standard 700 mm worktop, allowing the shelf to span the full length without overhang. The depth of 300 mm keeps stored items within arm's reach of a standing operator, while the 1000 mm height places the shelf at a level where it is easily accessed without stooping.

Cleaning is straightforward: the smooth steel surface is wiped down with a damp cloth and a mild detergent after each service. Because there are no moving parts or hidden crevices, no disassembly is required. The welded construction also means there are no fasteners to trap food debris or grease.

The shelf is available in other widths and heights to match different table configurations. Custom sizes can be ordered through consultation with Novameta specialists, allowing the shelf to fit non-standard worktops or specific kitchen layouts.

This upper shelf is listed in the Novameta catalogue under worktop accessories for professional catering tables.