Service bridge with 3 shelves Novameta BHS-LPL3-60/30/100

An upper shelf adds organised storage above a catering worktop without taking floor space. It holds trays, utensils or ingredients within easy reach, keeping the work surface clear for preparation. The shelf is fixed to the uprights of the table frame, creating a second tier that follows the same work flow as the main bench.

The shelf is made of AISI 304 stainless steel, a corrosion-resistant alloy that withstands kitchen humidity and frequent cleaning. The frame is welded for strength and rigidity, preventing sag under the weight of stored items. A slight overhang on the front edge stops items sliding forward when the shelf is loaded.

Installation follows the existing table uprights. The shelf brackets bolt directly to the vertical posts, aligning the shelf parallel to the worktop below. Once secured, the shelf becomes a permanent part of the workstation, ready to hold whatever the kitchen requires during service.

Dimensions of 600 mm width, 300 mm depth and 1000 mm height give a footprint that matches the standard 600 mm worktop below. The 1000 mm height places the shelf above head level for most operators, keeping stored items visible and accessible without interfering with movement around the bench.

Cleaning is straightforward: wipe the steel surface with a damp cloth and a mild detergent. The welded construction has no seams or crevices where dirt can collect, and the smooth finish allows quick drying. Regular wiping prevents grease build-up and maintains the shelf's appearance.

Custom sizes and designs are available through consultation with Novameta specialists. The shelf can be manufactured to individual measurements, allowing it to fit non-standard worktops or specific kitchen layouts.