Room divider BHS-HoReCa 3G-Dscreenpot-400

A divider screen pot creates separate zones on a busy worktop, letting chefs keep raw, cooked and allergen-containing ingredients apart without extra containers or cutting boards. The screen stands upright on the bench, forming a physical barrier that stops cross-contamination while leaving both hands free for preparation. Its open construction allows air to circulate, so damp items such as salad leaves or herbs stay fresher than they would in a closed box.

The BHS Divider Screen Pot H-400 mm is a straight aluminium panel mounted on a weighted base. The panel slides within two end posts, so the overall length can be adjusted from 1000 mm to 1800 mm to fit different worktop depths. Once the desired length is set, a simple locking mechanism secures the panel in place. The screen remains stable on the bench during use, even when the operator brushes past or loads ingredients against it.

To use the divider, place the unit on a clean, dry worktop. Extend or shorten the panel to match the bench depth, then lock the slider. Position the screen where the separation is needed—between raw poultry and ready-to-eat vegetables, for example. Ingredients can be laid on either side of the barrier, and the chef works across the screen without transferring contaminants. When the task is complete, lift the divider off the bench and store it flat or on its end.

The screen is made of brushed aluminium, chosen for its light weight and resistance to corrosion in a kitchen environment. The base is powder-coated steel for durability and easy cleaning. No electrical supply or moving parts are involved, so maintenance is limited to wiping the surfaces with a damp cloth and mild detergent after each service.

The adjustable length of 1000–1800 mm allows the divider to span most standard worktop depths, while the 440 mm width keeps the footprint small enough to leave room for other tools. The 400 mm height provides a clear visual barrier without blocking overhead lighting or sight lines across the bench.

A single version is supplied, ready to use out of the box. No additional fittings or accessories are required.