Rinsing shower MONOLITH R0101020126

A pre-rinse unit clears plates, pots and utensils by directing a strong, adjustable jet of hot water across the work surface. The water is drawn from the building supply, mixed to the chosen temperature inside the valve body, and released through the spout or hand shower. The force of the jet dislodges food debris before it dries, reducing the need for soaking and scrubbing. Because the water is heated only when the handle is turned, the unit avoids the energy cost of keeping a tank hot continuously.

The MONOLITH Shower with Mixer 20126 mounts through a single hole in the worktop or splash-back. The spout sits at the centre of a vertical support tube, so the weight of the water column is evenly distributed and the unit remains stable during use. A round mixer handle on the front face combines hot and cold supplies in one movement, giving fine control over both flow rate and temperature. A Basic hand shower is clipped to the side of the support tube; when the operator pulls the shower head free, the water switches from the fixed spout to the handheld outlet, allowing the jet to be aimed at awkward angles or tall vessels.

To start, the operator turns the round handle clockwise to open the cold supply, then gradually rotates it anti-clockwise to introduce hot water until the desired temperature is reached. The flow rate increases as the handle is opened further. When the hand shower is needed, it is unclipped from its bracket; the water automatically diverts to the shower head, and the spout stops flowing. Replacing the shower head on the bracket returns the flow to the fixed spout. The operator can rinse a stack of plates under the spout, then switch to the hand shower to reach the corners of a deep bain-marie or the inside of a tall stockpot.

The unit is built as a one-hole pre-rinse assembly. The support tube, spout and mixer body are formed from a single casting, minimising joints that could trap debris or leak. A round handle with a smooth contour allows precise adjustment without sharp edges. The Basic hand shower is designed for frequent use; its compact head produces a concentrated jet that cuts through food residue without excessive splash.

A single-hole installation simplifies mounting and reduces the number of seals that must be maintained. The round mixer handle gives tactile feedback, so the operator can set the same temperature and flow each time without looking. The central spout position keeps the water stream steady, preventing the unit from rocking when the handle is turned quickly.

Cleaning follows from the parts the unit carries. The spout and hand shower should be wiped daily to remove food particles and limescale. The round mixer handle can be cleaned with a damp cloth; its smooth surface prevents build-up. The hand shower head has small nozzles that may clog with limescale; soaking it in a descaling solution restores full flow. The single-hole mounting means there are no gaps around the base where dirt can collect, and the vertical support tube is easy to reach for regular wiping.