Refrigerated counter with drawers Novameta BHS-FP0-E342-172/70/90

A cooling counter keeps prepared food at safe holding temperatures while providing a worktop for plating, garnishing or assembling dishes. The refrigeration unit circulates chilled air through insulated walls and a sealed evaporator coil, removing heat from the interior. This steady removal of heat maintains the set temperature range without freezing the contents, allowing ingredients to stay fresh and ready for service without drying out or developing ice crystals.

The Novameta P342 is loaded from the front through two hinged doors and four full-extension drawers. The operator sets the desired temperature on the digital control panel, then loads trays, containers or loose ingredients into the drawers or shelves behind the doors. The unit runs continuously, holding the temperature until the food is needed.

The construction is AISI 304 stainless steel throughout, including the 1720 mm worktop that provides a hygienic surface for food preparation. High-density insulation minimises temperature loss, while the internal freezing unit is positioned to maximise usable volume without obstructing access. The exterior dimensions of 1720 mm long, 700 mm wide and 900 mm high allow the counter to fit against a wall or between other kitchen units, taking up the same footprint as a standard worktop.

The 230 V single-phase power supply matches the standard circuit used in professional kitchens, avoiding the need for special wiring. The 0.293 kW power rating reflects the load on the refrigeration unit, which runs intermittently to maintain temperature rather than continuously cooling a large volume from ambient. The 330 L interior capacity is distributed across the two-door section and the four drawers, giving organised storage for ingredients that need to be accessed frequently during service.

Cleaning follows from the stainless steel construction and sealed refrigeration system. The worktop and interior surfaces can be wiped down with standard kitchen sanitiser, while the drawers and shelves are removable for thorough cleaning. The insulation and refrigeration components are enclosed, requiring no maintenance beyond occasional checks of the door seals to ensure they remain airtight.

The Novameta P342 is a single model with no variants, designed as a standalone cooling counter with a worktop.