Refrigerated counter with drawers Novameta BHS-FP0-E212-130/70/90

A cooling counter keeps prepared ingredients and plated dishes at safe holding temperatures without drying or spoilage. It circulates chilled air evenly around the contents, maintaining a consistent low temperature that slows bacterial growth while preserving texture and flavour. The refrigeration system draws heat from the interior and expels it at the rear, allowing the unit to sit against a wall or under a worktop without overheating adjacent equipment. The operator loads the five full-width drawers with food pans, plated dishes or packaged ingredients. Each drawer slides out on telescopic runners, giving clear access without tilting or spilling. A digital controller on the front panel sets the holding temperature between -5 °C and +8 °C; once the set point is reached, the unit maintains it automatically. The transparent front panel lets staff check contents without opening the drawers, reducing cold-air loss and energy use. The counter is built from AISI 304 stainless steel throughout, including the exterior, interior and drawer fronts. This grade resists corrosion from moisture and cleaning chemicals, and it does not absorb odours or stains. The refrigeration system is fully sealed and CE marked, indicating compliance with European safety and environmental standards. A 230 V single-phase supply powers the compressor and fan. The 1300 mm width allows the unit to fit through standard kitchen doorways and align with existing worktops or counters. The 361 L volume provides storage for multiple gastronorm pans or plated dishes, while the 900 mm height keeps the work surface at a comfortable level for staff. The 700 mm depth leaves room for rear ventilation without protruding into the main traffic aisle. The seamless stainless-steel drawers and countertop shrug off kitchen splashes and grease, so a quick wipe restores the surface to a hygienic shine between service rushes. The drawers lift out for thorough washing, and the telescopic runners can be removed for degreasing. The refrigeration system requires no daily maintenance beyond checking that the condenser coil at the rear is free of dust and grease. The P212 is a single model with no variants. It is placed in the catalogue under refrigeration and holding equipment, specifically in the section for under-counter and counter-top cooling units.