Neutral distribution table Novameta Z-EPC-PLV-190/70/90

A neutral serving module provides a stainless steel worktop surface for plating, garnishing and holding prepared dishes at service temperature without active heating or chilling. The unit stands between the hot and cold sections of a pass, allowing staff to assemble plates without crossing between stations. The module is a static shelf assembly: no element, fan or compressor is fitted. Its role is to give a clean, durable surface at standard worktop height where food can be portioned, sauced and transferred to the front-of-house counter. The flat top is easy to wipe and resists the heat of hot pans and the moisture of chilled items. To use the module, staff place empty plates or trays on the worktop, portion the food from the adjacent hot and cold wells, and slide the completed plates forward to the service counter. The shelf below can hold backup crockery, cutlery or garnishes within arm's reach. No controls are present; the unit is always ready and requires no start-up or shutdown procedure. Construction is a welded stainless steel frame with adjustable feet for levelling on uneven floors. The worktop is a single sheet of brushed stainless steel, seamless at the corners. The shelf is also stainless steel, supported by brackets bolted to the frame. No doors, drawers or cupboards are fitted, keeping the footprint small and the interior accessible for cleaning. The 1900 mm length creates a continuous run alongside standard hot and cold counters, matching their height and depth. The 700 mm width gives enough space for two staff to work side by side without crowding. The 900 mm height aligns with adjacent equipment for a seamless pass line. Each shelf supports a uniform load of 120 kg, allowing heavy trays or bulk containers to be placed without risk of sagging. Cleaning is straightforward: the worktop and shelf are wiped with a sanitising solution after each service. The open frame allows access to the underside and legs for periodic deep cleaning. No filters, gaskets or moving parts require maintenance beyond routine wiping. The module is supplied as a single unit in the 1900-7 configuration. This standalone worktop unit is designed to integrate seamlessly into your existing kitchen layout without requiring additional components. Placement in the catalogue: neutral serving modules, worktop equipment, service area organisation.