Module with cup dispenser Novameta BHS-Z-CUPS4-20/80/90

A stainless steel module designed to hold four cup dispensers and a drawer for ice storage, this unit organises serving essentials at a single station. The dispensers release cups one at a time, preventing spills and keeping the worktop clear. Below, the drawer provides quick access to ice without opening a separate freezer, reducing cross-contamination and saving steps during service.

The module relies on gravity to feed cups downward as each one is removed. A simple internal guide keeps the stack aligned, so cups do not jam or tip. The same principle applies to the ice drawer: a flat, unobstructed bottom allows ice to slide forward smoothly when the drawer is pulled. Adjustable feet compensate for uneven floors, ensuring the unit remains level and the dispensers work without binding.

To use the module, load the cup dispensers from the top, stacking cups inside each tube. Fill the ice drawer from the front, then close and lock it. During service, staff pull a cup from the dispenser or open the drawer for ice, returning to the same station each time. The removable back panel allows access for cleaning or maintenance without moving the entire unit.

Construction is fully stainless steel, including the exterior, socle and adjustable feet. The powder-coated finish resists scratches and stains, while the H2 hygienic rating confirms surfaces are easy to sanitise. A lock secures the ice drawer when the unit is unattended.

The 200 mm depth fits neatly against a wall or between other modules, while the 800 mm width provides space for four dispensers side by side. At 900 mm high, the unit sits at a comfortable working height for most staff. The 60 mm adjustment range on the feet allows the module to sit level on floors that slope up to 50 mm or down to 10 mm.

Cleaning involves wiping the stainless steel surfaces with a sanitising solution, removing the back panel to reach internal guides, and emptying the ice drawer before defrosting. The flat bottom and removable components simplify thorough cleaning without disassembly.

This module is part of the Novameta modular counter system, designed to integrate with other units of matching dimensions.