Metal table with adjustable top and sink Novameta BHS-IRRV-90/60/90

A stainless-steel worktable on adjustable legs brings a sink directly into the kitchen work flow without a fixed height that would force staff to bend or stretch. The table stands on four threaded feet that screw up or down to level the top and set the working height for the task at hand. Once locked, the legs hold the load without sag or sway, keeping the sink stable and the work surface flat.

The table is built for two working loads: a lighter rating for general food prep and a heavier rating for loaded service trays. Each load rating is matched to a separate worktop thickness, so the same frame can be ordered for either duty without over-building or under-supporting.

To use the table, the operator first adjusts each leg until the worktop is level and at the desired height. The inset sink is then plumbed to the hot and cold supply, and the waste outlet is connected to the drainage system. Food is prepared on the worktop, utensils are rinsed in the sink, and waste water drains directly away, keeping the work area dry and hygienic.

The frame and legs are made of stainless steel, and the worktop is a single sheet of the same material, welded to form a seamless rim around the sink cut-out. The sink itself is also stainless steel, with a smooth, rounded interior that prevents food debris from catching and makes cleaning straightforward.

Controls are limited to the four threaded feet, each fitted with a locking nut. Turning the feet raises or lowers the table, and the nuts are tightened to hold the setting.

The overall dimensions of 900 mm wide, 600 mm deep and 900 mm high give the table a compact footprint that fits between existing units or against a wall, while the adjustable height allows it to serve as a prep surface, a plating station or a temporary service point without requiring a dedicated space for each function.

Cleaning is carried out with standard kitchen sanitiser. The stainless-steel surfaces are wiped down after each shift, and the sink is scrubbed to remove any food residue. The threaded feet are checked periodically to ensure they remain tight and the table stays level.

Two versions are available: one with a 650 kg worktop load rating for general prep, and one with a 700 kg rating for loaded service trays.