Insulated box HENDI 707951

An insulated box keeps food at serving temperature while it moves from kitchen to service point. The walls and lid trap air in a thick layer of foam, slowing the flow of heat in or out. This method lets the box hold chilled desserts below freezing or hot stews above boiling without electricity, relying only on the insulation and the initial temperature of the load. The result is safe, consistent food quality over hours, not minutes, and no risk of cold spots or overheating that a powered unit might create.

To use the box, the operator first pre-chills or pre-heats it with the food inside. The lid is closed and latched, sealing the interior. The box is then carried by its ergonomic side handles, which are shaped to fit the hand and distribute the weight evenly. At the destination the lid is opened and the food served directly from the box or transferred to a bain-marie or refrigerated counter. The same box can be reloaded and sent back for reuse throughout the day.

The box is built as a single moulded shell in food-safe plastic, with a smooth interior that wipes clean and rounded corners that prevent trapped food. The lid seals with a gasket and two latches, one on each side, so it stays shut during transport. The handles are moulded into the sides and reinforced to carry the full load without bending or breaking.

The 53 litre capacity holds enough for a full service in a small operation or a single course in a larger one. The footprint of 685 by 485 millimetres fits on a standard worktop or in a delivery van rack, while the 260 millimetre height leaves clearance for stacking or for a cooling element underneath. The temperature range from -20 °C to +110 °C covers frozen, chilled and hot food, so the same box can be used for ice cream in the morning and soup in the evening without risk of warping or cracking.

Cleaning is done with a damp cloth and mild detergent; the smooth surfaces and rounded corners prevent dirt from collecting. The box is rinsed and dried before storage. No disassembly is needed, and no parts require lubrication or adjustment.

The box is compatible with GN 1/1 containers, though these are sold separately. An extension frame and a cooling-element container are available as optional extras for longer holding times or lower temperatures.