Industrial mixer faucet MONOLITH OLIMPO001

A water mixer blends hot and cold supplies into a single stream at the temperature the operator sets. The valve inside the body opens or closes each inlet in proportion to the handle position, so the water that leaves the spout is neither scalding nor icy. This method gives instant control over temperature and flow without separate taps or a storage tank.

The OLIMPO001 is a one-hole model: the spout, handle and body mount through a single opening in the sink deck or worktop. The operator turns the star-shaped handle clockwise to reduce flow and anticlockwise to increase it; the same movement shifts the mix from cold to hot. The 350 mm spout swings over the sink, directing the stream where it is needed without splashing the surrounding surfaces.

The spout is a fixed “c” profile with a 24 mm outlet. It projects horizontally from the body, keeping the water clear of the sink rim and allowing large pots and containers to be filled without tilting. Flexible supply hoses are not included and must be ordered separately to match the local plumbing.

The body and spout are mounted with a single fixing nut beneath the sink. Once tightened, the unit stays secure on the deck without additional brackets or supports. The star handle gives a firm grip even when the operator's hands are wet or greasy, reducing the risk of slipping and accidental scalding.

Cleaning is limited to the external surfaces: wipe the spout and handle with a damp cloth to remove limescale or grease. The internal valve requires no routine maintenance beyond occasional inspection for leaks at the base of the handle.

The OLIMPO001 is classified as a water mixer in the MONOLITH professional catering range.