Industrial mixer faucet MONOLITH EXTBFMINI040R

A pre-rinse shower mixes hot and cold water at the tap to deliver a high-velocity spray that strips food debris from pots, pans and utensils before they enter the wash cycle. The water is blended inside the body of the tap, so the operator receives a steady temperature without waiting for the pipes to balance. A swinging spout lets the spray reach every corner of a large sink or a stack of trays without moving the base, while the hand-held shower head gives precise control for delicate items or awkward shapes.

The operator turns the round handles to set the flow and temperature, then pulls the lever on the spout to switch between the fixed spray and the hand-held shower. The 155 mm hole spacing matches standardised sink drillings, so the unit drops into an existing worktop without extra cutting or adapters. The metal tube that carries the spout also acts as a support, keeping the assembly rigid under the force of the water and the weight of the hose.

Construction is a two-hole design: one hole for the hot supply, one for the cold. The spout swings through a full arc, and the shower hose hangs from the centre of the tube so it does not twist or kink when the spout is moved. Round handles give a firm grip with wet hands, and the mini version reduces the overall height to fit under low cupboards or shelves.

Cleaning is limited to the parts the water touches: wipe the spout, handles and hose with a damp cloth to remove limescale or grease, and flush the shower head by running it at full flow to clear any trapped particles. The fixed hole distance means the unit can be swapped for another of the same spacing without altering the sink.