Industrial mixer faucet MONOLITH EXTBF0070P

A pre-rinse shower clears plates and utensils by directing a strong, adjustable jet of hot and cold blended water. The mixer valve combines the two supplies, letting the operator set the temperature and flow with a single movement of the handle. The water travels through a rigid spout or a detachable hand shower, both fed from the same valve, so the jet can be aimed precisely at the soiled items on the worktop or in the sink.

The unit mounts through two holes spaced 155 mm apart, matching the standard spacing on most commercial sink decks and pre-rinse stations. Round handles give a secure grip even when hands are wet or greasy, and the valve mechanism is designed to respond smoothly to small adjustments, preventing sudden changes in temperature or pressure.

Both outlets connect to the same mixer, so switching between them does not interrupt the flow or require re-setting the temperature.

Installation follows the two-hole layout: the spout and hand shower are mounted on the deck, with the mixer body beneath, secured by a single fixing nut. The rigid spout measures 250 mm from the deck to the outlet, giving clearance over the sink edge. The hand shower stores on a bracket when not in use, keeping the worktop clear.

Cleaning is limited to wiping the exposed surfaces with a damp cloth to remove limescale or grease. The round handles and spout are designed without crevices, so residue does not collect. The hand shower head can be detached for rinsing if debris accumulates in the spray nozzles.

The unit is supplied as a complete assembly, with no variants or additional parts required for installation. It is listed in the catalogue under commercial sink fittings and pre-rinse equipment.