Hot drop-in surface Novameta Z-UWPS6-FLUSH-193/51/12

A heated glass surface built flush into a worktop holds six full-size gastronorm pans side by side without raised edges or gaps. The glass panel is warmed from beneath by electric elements, spreading heat evenly across its entire width. This method keeps food at serving temperature without drying or scorching, because the heat is gentle and radiant rather than direct flame or forced air.

The operator slides the pans onto the glass, sets the desired temperature between 30 °C and 85 °C, and leaves them in place until service is complete. A single control adjusts the heat level, so all six pans receive the same warmth. The flush installation means the surface sits level with the surrounding worktop, allowing pans to be moved on and off without lifting over a rim.

The unit is framed in stainless steel and measures 1930 mm wide, 510 mm deep and 120 mm high. Its 3.3 kW power rating draws a steady load suitable for a dedicated kitchen circuit. The 1930 mm width matches the standard spacing of six GN 1/1 pans, so each pan sits over its own heating zone without overlap.

Cleaning is done after the surface has cooled: the glass panel is wiped with a damp cloth and mild detergent, while the stainless steel frame is cleaned with non-abrasive cleaners to maintain its finish. The flush design prevents food debris from collecting at the edges, reducing the need for deep scrubbing.

This model is a single build-in flush heated surface designed for professional kitchens requiring consistent, low-temperature holding of multiple pans.