Hot drop-in surface Novameta Z-UWPS1-FLUSH-31/51/12

This flush-mounted heated glass surface integrates into worktops to keep gastronorm 1/1 pans at serving temperature. The design allows pans to slide on and off smoothly without lifting over edges, as the unit sits level with the surrounding surface.

An electric element beneath the glass panel distributes heat evenly, preventing hot spots that could overheat or underheat food. The surface matches the size of a single GN 1/1 pan, ensuring no energy is wasted on unused space.

To operate, place a GN 1/1 pan on the glass and adjust the control knob to the required temperature, ranging from +30 °C to +85 °C. The unit maintains the set temperature until the pan is removed or the unit is switched off. The glass remains warm but not dangerously hot, allowing safe handling nearby.

Constructed with a stainless-steel frame and tempered glass top, the unit measures 308 mm in width, 510 mm in depth, and 119 mm in height, fitting into a standard worktop cut-out. With a 0.72 kW power rating, it can be connected to a typical electrical circuit without issues. The temperature range suits gentle warming for sauces and firmer holding for hot dishes.

Cleaning is simple: once cooled, the glass can be wiped with a damp cloth, while the stainless-steel frame resists corrosion and can be cleaned with standard kitchen sanitiser. The flush design eliminates ledges or crevices where debris might accumulate.

The unit is available in two depths: 510 mm (article Z-UWPS1-FLUSH-51) and another standard depth, both sharing the same 308 mm width and 119 mm height.